RPT logo
side

Tradeshows Quote Videos

Rupture Pin Products Heading

Click on any product for more details.
Model A Model B Model C-AA Model C-AB Model C-M Model C-N Model C-T Model D-AA Model D-CA Model D-G Model I-A Model O-A

General Specific Options:
• Automatic opening in case of fire.
• Indicator that shows a pressure limit has been exceeded.
• Steam jacketed relief valves.
• Opening from a remote position.
• Proximity switch for a remote indication the valves has opened.
• Pin container at the valve for ready access to spare pins.
• Flush port to wash seat area.
• Stainless steel pin guard to protect pin from accidental damage.

For a quote on an application not covered above send all pertinent information to your sales representative or eddie@rupturepin.com.

 

General Details on Rupture Pin Valves:
Keep in mind there are many variations for size, pressure and custom designs for each model.

Models A - Valves that sense line pressure, vent direct to atmosphere.
Models B - Valves that sense line pressure, vent direct to atmosphere.
Model Ball-A - Ball type relief valve with an actuator using a Buckling
   Pin pilot.
Model Ball-B - Using system gas directed to the actuator by the pilot.
Model Ball-C - Using instrument air directed to the actuator by the pilot.
Model BF-A - Butterfly type relief valve with an actuator using a Buckling
   Pin pilot.
Model BF-B - Using system gas directed to the actuator by the pilot.
Model BF-C - Using instrument air directed to the actuator by the pilot.
Angel Model C - Valves that sense upstream pressure and vent downstream.
Model C-Tri - Clean service pressure relief valves.
Angel Model C-Bal - Valves that sense upstream pressure with
   downstream pressure balanced out.
Inline Model D - Valves that sense upstream pressure and vent downstream
   to atmosphere.
Inline Model D-Bal - Valves that sense upstream pressure with
   downstream pressure balanced out.
Model DG - Rupture Pin globe type relief valves to sense upstream pressure
   and vent to atmosphere.
Model DG-OD - Rupture Pin globe type relief valves to sense differential
   pressure and vent to downstream.
Model DG-Bal - Rupture Pin globe relief valves to sense upstream pressure
   only, downstream pressure balanced out and vent downstream.
Model F-A - High volume low pressure relief.
Model F-B - High volume vacuum relief.
Model F-C - High volume pressure and vacuum relief combined.
Model F-D - High volume low pressure, downstream balanced relief.
Model H - Extreme high pressure low volume relief.

Mud and Slurry Relief Valves:
Model I-AS - 2" and 3" NPT to 6,000 PSI (414 BARG).
Model I-AU - 2" and 3" hammer union to 6,000 PSI (414 BARG).
Model I-BU - 3" hammer union to 10,000 PSI (690 BARG).
Model I-CU - 2" and 3" hammer union to 15,000 PSI (1034 BARG).
Model L - Extreme low pressure relief.
Model SP - Plastic valves for corrosive fluids.
Model ST - Steam relief.
Model T - Pressure relief for toxic fluids.

Specific Applications:
• Relief System to protect oil well pump systems.
• Automatic filter switching valve.
• Remote indication the valves has opened.
• For a quote on any application fill out and send the quote information form that follows.

Applications
• Autoclave Relief
• Azide Reactor Relief
• Bromine Isolation
• Bromine Relief
• Chlorine Isolation
• Chlorine Relief
• Deggendorfer Reactor Relief
• Drilling Mud Relief
• Excess Flow Shut Off
• Explosion Protection
• Filter By-Pass
• Filter Flow Diversion


• Filter Flow Shut Off
• Flame Arrester By-Pass
• Flare Relief
• Flourene Isolation
• Flourene Relief
• Line Break Isolation
• Meter Run Isolation
• Mud Relief
• Pasteurizing Vessel Relief
• Pilot Valve Relief
• PD Meter By-Pass
• PD Meter Flow Shut Off


• Plastic Injection Relief
• Positive Displacement Pump Relief
• Pressure and Vacuum Relief
• Pressure Isolation (ESV)
• Pressure Relief
• Pulp Digester Relief
• Pump By-Pass Relief
• Reactor Relief
• Regulator Flow Isolation
• Safety Isolation
• Slurry Relief
• Synthetic Rubber Reactor Relief
• Vacuum Relief